Installation Requirements - Toshiba 2000 User Manual

1.3 Installation Requirements

Observe the following when planning and designing the installation environment.
The installation environment must satisfy the conditions described below.
Operating ambient
temperature
Storage
temperature
Relative humidity
Dust density
Corrosion
resistance
Vibration resistance
Shock resistance
Usable altitude
Dielectric strength
Ambient
atmosphere
Structure
Cooling
EMC
Grounding
6F8C1111
Item Hard Disk Drive model
o
5 – 40 C
o
-10 – 50 C
10 to 90%RH, no condensation
3
10mg/m
No corrosive gas is present.
2
1.96m/s
for 30 minutes in X, Y, Z
direction
2
98m/s (10G) 3 times each X, Y, Z direction
Up to 2000m
1500Vac/1 min.
No corrosive gas is present.
Built-in control panel
Natural air cooling
6 KV
10 V/m
2 KV/1 KV/0.25 KV: Fast transient
Grounding resistance 100Ω or less
or less
(0.2G) continuously
: Static electricity discharge resistance
: Radiation field
1.3 Installation Requirements
Flash Disk Drive model
o
0 – 50 C
o
-25 – 70 C
5 to 90%RH, no condensation
2
9.8m/s (1G) continuously for
30 minutes in X, Y, Z direction
1
5