A Q&A - Toshiba 2000 User Manual

Sometimes, the device does not function as you expected or you may not know what
to do next. Read this section before you suspect that the device is faulty.
If an error message appears while using an operating system command, refer to the
operating system manual.
For information concerning the use of each application program, refer to the operation
manual of the respective application program.
Power does not turn on.
The main unit power
does not turn on.
An error message appears.
An error message
appears during startup.
An error message
appears when using an
application program.
6F8C1111
Appendix A Q&A
Q
Symptom
Is the power cable connected to
the electrical outlet?
Is power supplied to the electrical
outlet?
Q
Symptom
Did you turn the power off and
then back on immediately?
Is the BIOS set correctly?
A
Check
Turn off the AC power switch of
the power module and plug into
the electrical outlet.
See "3.1.1 Turning On the
Power"
Plug into proper electrical outlet.
A
Check
Wait at least 5 seconds after
turning off the power before
turning it back on.
Refer to "6.1 Setting the BIOS"
and check.
Refer to your application
program's operation manual.
Action
Action
45