– When attaching the camera body, ensure that the Sony
logo is at the top.
0°
270°
180°
Top = N
Removing the camera
Loosen the mounting screws
1
Push a small object (for example, the 1.5 Allen key)
into the opening above the access flaps to open them
(push straight, do not wobble).
90°
Top
2
Using the T10 Allen key, turn each mounting screw
four full turns counterclockwise to loosen them.
Push
4
T10
Remove camera
1
Turn the camera counterclockwise to disconnect it
from the mounting ring.
2
Disconnect the Ethernet cable and remove the camera.
1
7
Push
4
T10
2