ABB HT609106 Operation Manual page 62

Operation Manual / TPS48-D/E.. - TPS61-D/E..
5 Maintenance / 5.4 Cleaning components mechanically
© Copyright 2020 . All rights reserved.
Pull out the sheet-metal coverings (81137), bend them up and remove
u
the absorption segments (81136).
Clean the absorption segments (81136).
u
During cleaning, ensure that the absorption segments (81136) are
only cleaned with a mild jet of compressed air, soft brush or a damp
cloth.
Have absorption segments which are heavily contaminated replaced
u
by an official ABB Turbocharging Service Station.
Fitting the filter silencer
Insert the absorption segments (81136) into the sheet-metal cover-
u
ings (81137).
Bend the sheet-metal coverings (81137) back into their original shape
u
and insert them into the slot guides in the silencer body (81135).
Fit the cover grid (81266).
u
Fit the tension bands (81270) and apply tension at the locks (81271).
u
Damaged tension bands must be replaced with new ones.
u
If provided, fit the filter ring (81265).
u
HZTL2410_EN Rev.F March 2020