Disassembling And Assembling Turbocharger - ABB HT609106 Operation Manual

Operation Manual / TPS48-D/E.. - TPS61-D/E..
8 Disassembly and assembly / 8.3 Disassembling and assembling tur-
bocharger

8.3 Disassembling and assembling turbocharger

If provided
If provided
© Copyright 2020 . All rights reserved.
Removing the compressor casing
WARNING
Risk of burning
Touching hot surfaces or contact with hot operating materials can lead
to serious burns.
Do not touch hot surfaces and heed the warning plate on the tur-
u
bocharger.
Wear heat-resistant safety gloves and protective clothing.
u
Allow the turbocharger to cool down before carrying out any work.
u
Wear safety gloves to protect against thermal hazards.
Disconnect all air lines in accordance with the enginebuilder's instruc-
u
tions.
Remove the screws for the compressor casing insulation and dis-
u
mantle the insulation.
Undo the V-clamp (72020) and remove the filter silencer (81000) or air
u
suction branch (82000).
Removing the insulation
Loosen and remove the screws for the insulation plates (1, 2).
u
HZTL2410_EN Rev.F March 2020