Download Print this page

JVC GR-SXM590AG Instructions Manual page 26

Compact vhs camcorder
Hide thumbs Also See for GR-SXM590AG:

Advertisement

Playback Zoom
To magnify the recorded image up to 10X at any
time during playback. Make sure that the TBC
mode is activated.
R
1) Press PLAY
to find the scene of interest.
2) Press ZOOM (T/W)
end zoom press and hold W until magnification
returns to normal. Or, press STOP
R
press PLAY
.
• Due to digital image processing, the quality of the
image may suffer.
Animation And Time-Lapse
The remote control lets you set/release interval
time and recording time without setting REC TIME/
INT. TIME (
pg. 21) in SYSTEM MENU.
Animation
I
Each time ANIM.
changes in the following order: 1/4S, 1/2S, 1S, 5S
and no indication (off).
Time-Lapse
Each time REC TIME
time changes in the following order: 1/4S, 1/2S,
1S, 5S and no indication (off). Each time INT. TIME
d
is pressed, the interval time changes in the
following order: 15S, 30S, 1MIN, 5MIN and no
indication (off).
E
. Pressing T zooms in. To
Y
and then
is pressed, the recording time
I
is pressed, the recording
Insert Editing
You can record a new scene onto a previously
recorded tape. Only the video signal is recorded in
this mode.
1) Set the Power Switch
down the Lock Button
2) Play back the tape, locate the edit-out point and
a
press PAUSE
w
for more than 1 second to reset the tape
counter, then press it again for less than
1 second so that "M" appears.
T
3) Press REW
of the scene you want to replace, press PLAY
to view the recorded tape, and press PAUSE
exactly at the edit-in point where the new scene
should start.
4) While holding down INSERT
release PAUSE
5) To begin Insert Editing, press START/STOP
When the counter reaches "0:00:00", editing
stops automatically and the camcorder enters
the Insert-Pause mode. To end Insert Editing,
Y
press STOP
• During Insert Editing, the original audio will be
heard from the speaker.
• After step 4), "Retake" (
performed.
• The tape may stop slightly before or after the
designated end point, and noise bars may appear.
Neither indicates a defect in the unit.
26
@
to "
" while pressing
!
located on the switch.
. Press and hold COUNTER R/M
to go a little beyond the beginning
U
, press and
a
. w appears.
.
pg. 13) can be
R
a
O
.

Advertisement

loading