Table of Contents
Advertisement
18
www.aeg.com
10.3 Using the Function Lock
You can activate the function only when
the appliance operates.
The Function Lock prevents an
accidental change of the oven function.
1. To activate the function activate the
appliance.
2. Activate an oven function or setting.
3. Touch and hold
same time for 2 seconds.
An acoustic signal sounds.
Loc comes on in the display.
To deactivate the Function Lock repeat
step 3.
Description
1
SET+GO
2
RESIDUAL HEAT INDICATOR
3
KEY TONE
4
FAULTY TONE
5
SERVICE MENU
6
RESTORE SETTINGS
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is deactivated,
touch and hold
The display shows SET1 and "1" flashes.
2. Touch
3. Touch
4. Touch
of the setting.
5. Touch
10.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if an oven function operates and
you do not change any settings.
Temperature (°C)
30 - 115
120 - 195
and
at the
1)
for three seconds.
or
to set the setting.
.
or
to change the value
.
Switch-off time (h)
12.5
8.5
You can deactivate the
appliance when the Function
Lock is on. When you
deactivate the appliance,
the Function Lock
deactivates.
10.4 Using the settings menu
You can set the settings menu only when
the appliance is deactivated.
The settings menu lets you activate or
deactivate functions in the main menu.
The display shows SET and the number
of the setting.
Value to set
ON / OFF
ON / OFF
CLICK / BEEP / OFF
ON / OFF
-
ON / OFF
Temperature (°C)
200 - 245
250 - maximum
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off
does not work with the
functions: core temperature
sensor, Light, Slow Cooking,
Duration, End, Time delay.
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
Switch-off time (h)
5.5
1.5
Advertisement
Table of Contents
