Panasonic KY-A227E Operating & Installation Instructions Manual page 15

Installation Location
• Observe related
Built-in
laws for installation.
To the ceiling
Minimum clearance
Wall and ceiling
0
Incombustible* 1
Combustible 5
*1 Metal, tile, brick, etc. (Including heat-insulating board made of metal, tile, brick, etc.)
*2 An exhaust vent is provided on the back of the appliance.
Electrical Work
• Follow the local safety laws
and regulations for electrical
wiring and earthing applied
in the area.
• Do not twist or load on the
power cord.
• Single-phase 230-240 V/13 A (with a circuit breaker)
Dedicated
• Electric wire for house wiring: Single wire of at least 2.0 mm in diameter
circuit
* Stranded wire of at least 3.5 mm
(box type).
• Rated current: 20 A
Earth leakage
• Rated sensitivity current: 30 mA
circuit breaker * In accordance with the electrical wiring rules, incorporate the breaker and the
earth leakage circuit breaker in the home electrical wire.
• Type of socket:
• Installation location
Built-in
Wall socket
Install the socket where the plug can be
disconnected.
28
Free-standing
To the ceiling
Minimum clearance
(unit: cm)
70 0 1* 70
2
100 5 5 100
WARNING
• Provide socket wiring
for single-pole earthing.
2 can also be used for the wall socket
250 V/13 A type
Free-standing
Installing the Appliance
(unit: cm)
0
5
1
Insert the plug to the socket.
2
Insert horizontally.
3 Make sure there is no space between the countertop
and the top plate in the front, back, left and right.
Free-standing
(KY-C227E only)
Do not place.
●
Built-in
Do not drop.
●
Paper or sheet
Power cord
29