Routing Table; Neighbor Table; Threshold; Routing Icons - Motorola WMC7300715 User Manual

Figure 4-10

Routing Table

The Routing Table displays the MAC address for the Destination node and the node to be utilized for
the Next Hop, the number of Hops to the Destination node.
The minimum hop count from an SD to an IAP is 2. This is due to the inherent
design of the IAP which contains MWR device components internally. This means
that the first hop is from the SD to the IAP while the second hop is inside the IAP
itself (IAP to internal WR component).

Neighbor Table

The Neighbor Table displays the MAC address and the Signal Level for the adjacent nodes that the
WMC may route through, depending on the desired end node.
The Last Rate column displays the last data rate used to transmit user data to the neighbor destination.

Threshold

Adjusting the threshold control allows the user to view neighbors that have a signal level greater than
or equal to the selected threshold level.

Routing Icons

Table 4-4
6881011Y52-D January 2007
MeshTray Routing Tab
Routing Tab Icons
MOTOMESH 1.2 Wireless Modem Card Users Guide
4-13