Advertisement
Follow the remaining steps in the Storing a Number in Memory section to
complete the operation.
Storing Mixed Tone/Pulse Numbers
If your phone is set up for pulse dialing, you can store a mixed mode
number (up to 16 digits) to easily access long distance services.
1.Remove the handset from the base and press mem. The talk LED flashes
and you hear a beep.
2.Enter the number to be dialed in pulse mode.
3.Press the */tone button on the handset. The */tone button counts as one
digit and enters a pause.
4.Enter the number(s) to be dialed in tone mode.
5.Press mem and a number (1-9) on the keypad for the memory location you
wish to use. You hear a long beep and the talk LED goes out.
Dialing a Stored Number
To dial a phone number stored in memory, press talk, then press mem and
the memory location (0-9). Your phone will dial the stored number.
One-Touch Dialing
Your phone is equipped with three One-Touch Priority keys for instant
dialing (m1, m2, and m3). You cannot store phone numbers directly into
m1, m2, and m3. They are only used to dial phone numbers stored into
memory locations 1, 2, and 3 on the keypad.
11
Advertisement
