Using The Freeze Feature; Adjusting The Picture; Selecting The Picture Mode; Adjusting The Picture Quality - Toshiba 19SL410U Owner's Manual

Using the FREEZE feature

To use the FREEZE feature:
1
When viewing the TV, press
picture a still picture.
2
To return to the moving picture, press
again (or any other button).
Note: If the TV is left in FREEZE mode for more
than 15 minutes, the FREEZE mode will
automatically be released and the TV will return
to moving picture.
Using the FREEZE function for any purpose
other than your private viewing may be
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four
different modes, as described below.
Mode Picture Quality
Bright and dynamic picture (factory
Sports
setting)
Standard picture settings (factory
Standard
setting)
Lower contrast for darkened room
Movie
(factory setting)
Designed for viewing of PC tables
PC
and documents
Preference Your personal preferences
Note: PC mode is available for HDMI and PC
inputs only (grayed out for other input sources).
To select the picture mode using the menu
system:
1
Press and open the Picture menu.
2
Highlight Mode and press
Picture
Mode
Picture Settings
Noise Reduction
Game Mode
Theater Settings
36
Chapter 6: Using the TV's features
to make the
.
Sports
Off
3
Press or to select the picture mode you
prefer and press .
Sports
Standard
Movie
PC
Preference

Adjusting the picture quality

You can adjust the picture quality (Contrast,
Backlight, DynaLight™, Brightness, Color, Tint, and
Sharpness) to your personal preferences.
Selection Pressing
Contrast lower
Backlight* darker
DynaLight** On/Off
Brightness darker
Color paler
Tint reddish
Sharpness softer
*Backlight
This feature adjusts the brightness of the entire
screen.
**DynaLight
This function automatically strengthens the black
coloring of dark areas in the video according to the
level of darkness.
To adjust the picture quality:
1
Press and open the Picture menu.
2
Highlight Picture Settings and press
3
Press or to select the picture quality you
want to adjust (Contrast, Backlight, DynaLight,
Brightness, Color, Tint, or Sharpness), and then
press or to adjust the setting, as described in
the table above.
4
To save the new settings, highlight Done and press
. You can use any of the picture modes (
"Selecting the picture mode" on the left) as a
starting point for adjusting the picture settings.
To revert back to the base mode that you began
adjusting the picture settings from, highlight
Reset and press
The picture qualities you adjusted are automatically
saved in the Preference mode (
picture mode" on the left) until Reset is selected.
Pressing
higher
lighter
On/Off
lighter
deeper
greenish
sharper
.
.
"Selecting the