Adjusting The Audio; Muting The Sound; Using The Digital Audio Selector; Selecting Stereo/Sap Broadcasts - Toshiba 19SL410U Owner's Manual

You can also use the CC Selector to select digital
closed caption services (if available). When such
services are not available, the CC Selector presents a
default list of services.
To select closed captions:
1
Press and open the Preferences menu.
2
Highlight CC Selector and press
3
Press or to select Closed Caption, and then
press or to select the desired service.
4
Press .

Adjusting the audio

Muting the sound

Press on the remote control to partially reduce
(1/2 MUTE) or turn off (MUTE) the sound. Each
time you press , the mute mode will change in
the following order:
1/2 Mute Mute
If the closed caption mode is set to Off when you
select "MUTE" mode, the closed caption feature is
automatically activated if the TV program is Closed
Captioned. To mute the audio without automatically
activating the closed caption feature, use
the volume to 0. See "Using the closed caption mode"
( page 37) for more information on closed caption
modes.

Using the digital audio selector

You can use the Digital Audio Selector to
conveniently switch between audio tracks on a digital
channel (for those channels that have multiple audio
tracks). This temporarily overrides the audio track
chosen by the language option under Audio Setup (
"Selecting stereo/SAP broadcasts" on page 38).
To use the digital audio selector:
1
Press and open the Sound menu.
38
Chapter 6: Using the TV's features
.
Volume
to set
2
Highlight Digital Audio Selector and press
Sound
Digital Audio Selector
Audio Settings
Audio Setup
3
Press or to select Audio, and then press
to select the desired service.
4
Press .

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows
you to output high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language, music, or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the
word "STEREO" or "SAP" appears on-screen when
is pressed.The MTS feature is only available
for analog signals on the ANT/CABLE input.
To listen to stereo sound:
1
Press and open the Sound menu.
2
Highlight Audio Setup and press
3
In the MTS field, select Stereo.
4
To save the new settings, highlight Done and press
.
To reset the settings to the factory defaults,
highlight Reset and press
Note:
• You can typically leave the TV in Stereo mode
because it will automatically output the type of
sound being broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to
reduce the noise.
To listen to an alternate language on an
ATSC digital station (if available):
Highlight the Language field in step 3 above, and
then press or to select the language you prefer.
To listen to a second audio program on an
analog station (if available):
Select SAP in step 3 above.
.
or
.
.