Locking Channels; Unlocking Programs Temporarily; Using The Input Lock Feature - Toshiba 19SL410U Owner's Manual

Independent rating system for movies
Ratings Description and Content themes
X-rated (For adults only)
X
Not intended for anyone 17 and
NC-17
under
Restricted (Under 17 requires
R
accompanying parent or adult)
Parents Strongly Cautioned (Some
material may be inappropriate for
PG-13
children under 13)
Parental Guidance Suggested
(Some material may not be suitable
PG
for children)
General Audience (Appropriate for all
G
ages)
Note:
• If you place an " " in the box next to "None"
Rated, programs rated "None" will be blocked;
however, programs that do not provide any
rating information will not be blocked.
• To display the rating of the program you are
watching, press
it is rated "None," the word "NONE" appears in
the RECALL screen (as shown below right). If
rating information is not provided, no rating will
appear in the RECALL screen.

Locking channels

With the Lock feature, you can lock specific
channels. The locked channels can only be accessed
by entering the PIN.
To lock channels:
1
From the Setup menu, highlight Installation and
press .
2
Press or to select Channel Options and press
. The list of channels will appear.
Channel Options
Ch. Type
1 Digital
2 Analog
3 Digital
4 Analog
5 Analog
6 Analog
7 Analog
8 Analog
9 Analog
10 Analog
42
Chapter 6: Using the TV's features
on the remote control. If
3
Press and then or
the lock column.
4
Press . PIN code entry will be required to set a
locked channel.
Note: If the PIN code has not been set yet, a
warning message will appear.
5
A symbol will appear in the box.
To remove the symbol, press

Unlocking programs temporarily

If you try to tune the TV to a program that exceeds
the rating limits you set, the TV will enter program
lock mode and the following message will appear on-
screen:
This program exceeds the rating limit you set.
Push 'MUTE' to enter PIN.
You can either temporarily unlock the program or
select an unlocked program to watch.
To temporarily unlock the program:
1
Press .
2
Enter your four-digit PIN code and press
the correct code is entered, the program lock
mode is temporarily released and the normal
picture appears. The program lock mode will
resume when you tune to another TV program, or
when the TV is turned off and turned on again.

Using the input lock feature

You can use the Input Lock feature to lock the video
inputs (Video, ColorStream HD, HDMI 1, HDMI 2, and
PC) and channels 3 and 4. You will not be able to
view the input sources or channels until you unlock
the inputs.
To lock/unlock the video inputs:
1
From the Locks menu, Press
code entering screen.
2
Enter your four-digit PIN code and press
3
Press to highlight Input Lock and press
select the level of video input locking you prefer,
as described below.
to select a channel in
again.
. If
to display the PIN
.
to