Using The Hdmi ® Settings Feature; Viewing The Hdmi ® Signal Information; Using Your Pc With The Tv; Adjusting The Image - Toshiba 24SL415U Owner's Manual

Using the HDMI
®
Note: If some HDMI legacy sources do not work
properly with your HDMI TV, set INSTAPORT™ to
Off. Adjusting this setting should allow your HDMI
legacy source to operate properly with your TV.
Mode
Description
(default setting)
Reduces the lag time when
INSTAPORT : On
™
switching HDMI sources.
Adjusts the RGB full range signal
automatically.
When Limited is selected, the
RGB Range: Auto RGB output signal is output in
the range of 16 to 235. When Full
is selected, the RGB output signal
is output in the range of 0 to 255.
The RGB Range setting requires appropriate HDMI
source devices. If your HDMI source device does not
support this feature, the TV may not work properly
when it is enabled.
Note: If your HDMI connection is capable of 1080p
and/or your TV is capable of refresh rates greater
than 60 Hz, you will need a High Speed HDMI
Conventional HDMI/DVI cables may not work properly
with this mode.
1無
Select the appropriate HDMI input mode (HDMI 1,
HDMI 2, HDMI 3, or HDMI 4 (except 24SL415U)).
2無
> Settings > PREFERENCES > AV Connection >
3無
Press p or q to select HDMI Settings. Press
4無
Press p or q to select an item.
5無
Press t or u to select a setting.
Viewing the HDMI
information
1無
> Settings > PREFERENCES > HDMI
Information Display.
2無
Press t or u to select On. Press
banner and signal information banner appear.
Note:
• The signal information banner will appear when this
feature is set to On and you watch HDMI input.
• If you press when this feature is set to Off, only
the normal banner will appear.
42
Chapter 6: Basic features
settings feature
cable.
®
.
signal
®
. The normal

Using your PC with the TV

Adjusting the image

If the edges of the picture are hidden, readjust
Horizontal Position and Vertical Position. If the picture
is affected by interference, readjust Clock Phase and
Sampling Clock.
1無
Select PC input mode ( "Selecting the video
input to view" on page 35).
2無
> Settings > PREFERENCES > Display
Settings >
.
3無
Press p or q to select PC Settings. Press
Note: If a PC is not connected or there is no PC
input signal, this menu will not be available.
4無
Press p or q to select an item.
5無
Press t or u to make adjustments.
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of
malfunction.
Mode Description
Horizontal Moves the picture
Position left/right.
Vertical Moves the picture up/
Position down.
Helps to reduce noise
Clock Phase
and sharpen the picture.
Helps to reduce
Sampling noise and minimize
Clock periodic vertical
.
stripes on the screen.
* The default settings and /or adjustment ranges vary
depending on the input signal format.
To reset PC Settings:
Select Reset. Press

Setting the PC audio

You can output sound from your PC when connecting
it to your TV, using the AUDIO IN terminal and PC
audio cable.
1無
> Settings > PREFERENCES > AV Connection
> .
2無
Press p or q to select PC/HDMI 3 Audio.
3無
Press t or u to select PC.
Note: To select PC, set Shared PC Audio to PC.
Adjustment range
within ±10 from
center.*
within ±10 from
center.*
within ±15 from
center.
within ±5 from
center.
.
.