Using The Dolby ® Digital Dynamic Range Control Feature; Using Audyssey Dynamic Volume; Using Advanced Sound Features; Using Surround Sound - Toshiba 24SL415U Owner's Manual

Using the Dolby Digital Dynamic
®
Range Control feature
You can further compress Dolby Digital and Dolby
Digital Plus dynamic range so you can switch from
digital to analog broadcasts at the same dynamic range.
1無
> Settings > SOUND > Dynamic Range
Control.
2無
Press t or u to select On.
Note:
This feature is available when Dolby Digital
•
or Dolby Digital Plus is input to the TV in the
following situations:
-When tuned to a digital RF channel.
-When an HDMI input is used.
-When DLNA Certified products or widgets
are used.
This feature is automatically set to Off when
•
Dynamic Volume (Audyssey Dynamic
Volume ) is set to Low or High.
®
This feature will also affect Digital Audio
•
Output when the optical audio output format
is set to PCM.

Using Audyssey Dynamic Volume

This feature provides a consistent sound volume
between television programs, commercials, and
between the loud and soft passages of movies.
1無
> Settings > SOUND > Dynamic Volume.
2無
Press t or u to select Low, High, or Off.
Note:
If Dynamic Range Control is set to On, this
•
feature will be not available.
This feature does not affect the audio
•
signal output from the DIGITAL AUDIO OUT
terminal.
54
Chapter 7: Picture and sound controls
®

Using advanced sound features

Using surround sound

Voice Enhancement and Dynamic Bass Boost help
to create a thrilling surround sound experience with
deep, rich bass from stereo sound sources. Your TV's
audio will sound fuller, richer, and wider.
Note: Surround features are only available
for Stereo mode ( "Selecting stereo/SAP
broadcasts" on page 53).
1無
> Settings > SOUND > Advanced Sound
Settings >
.
2無
Press p or q highlight the feature to adjust. Press
t or u to adjust the item.
Mode Description
Voice Turns the vocal emphasis effect
On or Off.
Enhancement
Dynamic Bass Selects a bass expansion level
(Off, Low, or High).
Boost