Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from the
modes described below.
Mode
Description
Automatically adjusts picture settings
AutoView
based on ambient light conditions
®
and input signal content.
Sports
Bright and dynamic picture.
Standard
Standard picture settings.
Movie 1
Lower contrast for darkened room.
Movie 2
Designed for playing a video game
requiring split-second timing
Game
between the screen display and input
from the controller.
Designed for the viewing of PC
PC
tables and documents.
Note:
PC mode is available for HDMI and PC inputs
•
only (not displayed for other input sources).
Game mode cannot be turned on when the
•
ANT/CABLE input is selected.
1無
> Settings > PICTURE > Picture Mode.
2無
Press t or u to select a mode. Press
Note:
The picture mode you select affects the
•
current input only. You can select a different
picture mode for each input.
The picture mode can be changed to Game
•
mode by pressing
is ColorStream HD, PC, VIDEO, or HDMI.
Chapter 7: Picture and sound controls
.
when the input mode
Adjusting the picture quality
The adjustments you make to picture quality under a
picture mode are saved to that picture mode.
Selection
Pressing t
Backlight*
darker
Contrast
lower
Brightness
darker
Color
paler
Tint
reddish
Sharpness
softer
* Backlight: Adjusts the brightness of the entire screen.
When in video mode and no signal is input, this
selection is set to 0. (Settings are stored in memory.)
Note: Some settings cannot be adjusted in any
of the following cases.
AutoView is selected.
•
TheaterLock is set to On.
•
To adjust the picture quality:
1無
> Settings > PICTURE > the setting you
would like to adjust (Backlight, Contrast,
Brightness, Color, Tint, or Sharpness).
2無
Press t or u to adjust the setting. Press
Note:
Any picture settings that you adjust affect the
•
current input only. You can adjust the picture
quality separately for each input.
Depending on a Sharpness value, the Edge
•
Enhancer effect may be reduced.
To reset to the factory defaults:
1無
Select the picture mode you want to reset.
2無
> Settings > PICTURE > Reset >
A confirmation screen appears.
3無
Press t or u to select Yes. Press
Pressing u
lighter
higher
lighter
deeper
greenish
sharper
.
.
.
49