Table of Contents
Advertisement
3
[COLOR] button
4
[FILTER] button
5
[GAMMA] button
Use this button to display the color menus.
The menus will switch with each press of the button.
[COLOR TEMP]
[UHD CHROMA]
CORRECTION]
[SKIN CORRECTION]
"10 COLOR TEMP" (see page 71)
"08 UHD CHROMA" (see page 69)
"07 HD CHROMA" (see page 68)
"25 LINEAR MATRIX" (see page 90)
"26 COLOR CORRECTION" (see page 92)
"27 SKIN CORRECTION" (see page 95)
Status displays
Lit
The current value matches that configured in the reference file.
green:
Lit
The current value does not match that configured in the reference file.
red:
Off:
Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
Use this button to display the filter menu.
"04 FILTER" (see page 65)
Status displays
Lit
The current value matches that configured in the reference file.
green:
Lit
The current value does not match that configured in the reference file.
red:
Off:
Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
Use this button to display the gamma menus.
The menus will switch with each press of the button.
[GAMMA]
[BLACK GAMMA]
"15 GAMMA" (see page 76)
"16 BLACK GAMMA" (see page 78)
Status displays
Lit
The current value matches that configured in the reference file.
green:
Lit
The current value does not match that configured in the reference file.
red:
Off:
Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
- 25 -
[HD CHROMA]
[LINEAR MATRIX]
menu off (status screen)
menu off (status screen)
Parts and their functions
[COLOR
Advertisement
Table of Contents
