Table of Contents
Advertisement
Front panel 5
10
1
[ALM] indicator
2
[OPT] indicator
3
[EXT] indicator
4
[D.EXT] indicator
5
Adjustment value display
6
[ND] indicator
7
[CC] indicator
1 2
3 4
5
6
7
9
13
16
This is the camera and CCU warning indicator lamp.
Consult your dealer if a failure occurs.
The indicator's color changes to indicate when the camera and CCU optical reception level is
not strong enough, when a data error has occurred in the CCU optical transmission/reception
section, and when a fan error or temperature error has been occurred on the camera or CCU.
This is the camera cable warning indicator lamp.
Status displays
Lit orange:
Warns that an optical transmission error has occurred.
Lit red:
Indicates that the camera is not connected to the CCU.
Off:
The camera cable is connected normally.
This indicator lights to warn that the lens extender is set to something other than 1x.
Status displays
On: The lens extender is set to something other than 1x.
Off: This indicates that the lens extender is not being used or that it is not available.
This indicator lights to warn that the digital extender is set to something other than 1x.
Status displays
On: The digital extender is set to something other than 1x.
Off: This indicates that the digital extender is not being used or that it is not available.
Displays the ND filter, CC filter, iris, master gain, master pedestal, shutter, or sync shutter
adjustment value based on the item selected with the [DISP] button.
Lights when the ND filter is selected with the [DISP] button.
Status displays
Lit green:
Standard position set in the ROP menu.
Lit orange:
Updated from the standard position set in the ROP menu.
The standard position of the ND filter can be set in [ROP SETTING] > [STD POSITION
n
ND] in the ROP menu.
"STD POSITION ND" (see page 111)
Lights when the CC filter is selected with the [DISP] button.
Status displays
Lit green:
Standard position set in the ROP menu.
Lit orange:
Updated from the standard position set in the ROP menu.
The standard position of the CC filter can be set in [ROP SETTING] > [STD POSITION
n
CC] in the ROP menu.
"STD POSITION CC" (see page 111)
8
11
12
14
15
17
- 28 -
Parts and their functions
Advertisement
Table of Contents
