List Of Jumpers; Setting Jumpers - Asus Aaeon BOXER-6641 User Manual

2.3

List of Jumpers

Please refer to the table below for all of the system's jumpers that you can configure
for your application.
Label Function
JP19 ATX/AT Mode Selection
JP24 CMOS Control Selection (Clear CMOS)
2.3.1

Setting Jumpers

The BOXER-6641 comes with several jumpers which allow you to configure the system
by either setting the jumper to "open" or "closed"; or by selecting certain pins. A closed
jumper has two pins connected with a jumper clip, while an open jumper has no pins
connected.
For jumpers with multiple pins, this guide uses "pins A-B" to notate which pins should
be connected by a jumper clip. For example, "pins 1-2" means you should connect pins
1 and 2, while "pins 2-3" means you should connect pins 2 and 3.
A pair of needle-nose pliers may be helpful when working with jumpers.
If you have any questions about how best to configure the system for your application,
contact your AAEON representative or visit our website to talk with our support team.
Chapter 2 – Hardware Information 11