Philips AVENT SCF876 User Manual page 23

Problem Possible cause
The jar lid leaks. There is too much
food in the jar.
The jar lid is not
locked onto the jar
correctly.
The sealing ring
around the jar lid
is not assembled
correctly or is not
assembled.
The blending There is too much
function does not food in the jar.
work.
The jar is not placed
on the main unit
correctly.
The jar lid is not
locked onto the jar
correctly.
You are using the
appliance to blend
sticky food such as
cheese.
You have been
using the blending
function continuously
for more than 30
seconds.
The appliance There is too much
makes a lot of food in the jar.
noise, produces
an unpleasant
smell, is hot to
touch, emits
smoke, etc.
You have been using
the blending function
for too long.
The appliance The sieve is not
produces a lot attached to the jar lid.
of noise and
vibration during
blending.
Solution
Switch off the appliance and process a
smaller quantity.
Place the jar lid on the jar and turn it
clockwise to close it securely.
Make sure the sealing ring is correctly
assembled around the jar lid with the flat
side facing out.
Switch off the appliance and process a
smaller quantity. Raw food put in the jar
should not exceed top of the blade unit.
Place the jar on the main unit with the
lid on the top, align the
with the icon on the main unit, and
turn the jar clockwise to securely lock it
in place on the main unit.
Place the jar lid on the jar and turn it
clockwise to close it securely.
Check the recipe booklet and use
appropriate ingredients to blend.
Stop blending and let the appliance cool
down for a few seconds and then start
blending again.
Switch off the appliance and process a
smaller quantity.
Do not let the appliance blend
continuously for more than 30 seconds
at a time.
Make sure that the sieve is attached to
the jar lid.
ENGLISH
25
icon on the jar