Philips AVENT SCF876 User Manual page 24

ENGLISH
26
Problem Possible cause
Temperature of There is too much
the defrosted food in the storage
food is still low. pot.
Food in the storage
pot is too viscous.
The storage pot The storage pot lid is
leaks during not closed correctly.
reheating/
defrosting.
Water in the Food particles have
water tank has entered the water
an unusual color tank during use.
when you pour it
out of the water
tank or when it
enters the jar
during steaming,
or the water in the
water tank has an
unpleasant smell.
There are white There is limescale
spots on the water buildup on these
tank, water tank parts.
lid, jar, jar lid and
sieve.
The surfaces that Food colorings may
come into contact discolor the parts that
with food are come into contact
discolored. with food.
The appliance The jar is out of
sounds 5 times position or removed
and the steaming from the main unit
light flashes during processing.
during steaming,
reheating or
defrosting.
Solution
Make sure that the amount of food in
the storage pot does not exceed the
maximum scale marked on the side of
the pot.
Let the appliance cool down for 10
minutes and defrost again.
Before putting the storage pot in the jar
to reheat/defrost, make sure that the lid
is closed correctly.
Clean the water tank according to the
instructions in the chapter "Cleaning and
descaling". Use the appliance strictly
according to the instructions. Make sure
you do not overfill the water tank with
water (max. 250 ml) and that you do not
overfill the jar with food (do not fill the
jar past the top edge of the plastic part
of blade unit). Do not steam the same
ingredients for more than 30 minutes or
add liquid to the jar to steam. After you
have put liquids in the jar, never put the
jar in the steaming position with the jar
lid on the bottom.
This is normal. Remove the limescale
periodically. Clean the water tank lid,
jar, jar lid and sieve with a moist cloth.
Descale the water tank. Refer to the
section "Descaling" in the chapter
"Cleaning and descaling".
This is normal. All parts are still safe to
use and will do no harm to the cooked
food.
Turn the control knob to the off position
(OFF), check the water amount in the
water tank, place the jar on the main unit
correctly, and reselect the processing
time to start again.