Panasonic AJSD930P Operating Instructions Manual page 38

Setup menus
USER menu
<OPERATION>
No./Item
114 This selects whether to cause the REC INH
lamp to flash or light up when the cassette
REC INH has been set to the accidental erasure
LAMP prevention status.
0000 LIGHT : The lamp lights up.
0001 FLASH : The lamp flashes.
<Note>
When the REC INH switch is set to ON, the REC
INH lamp always lights regardless of the general
setting status.
115 This selects whether to enable or disable the
operation of the EJECT button on the front
EJECT SW panel.
INH
0000 REC : Operation is disabled while the
0001 OFF : Operation is enabled in all
116 This selects whether the EJECT lamp is to
remain lighted or be turned off in the cassette
EJECT LAMP out status.
0000 MODE1 :
The EJECT lamp remains lighted.
0001 MODE2 :
The EJECT lamp goes off.
117 This selects the conditions under which the
dial ring on the front panel is to light.
DIAL LAMP
0000 OFF : The dial ring does not light.
0001 MODE1 : The dial ring lights during search
0002 MODE2 : The dial ring lights during JOG
0003 MODE3 : The dial ring lights when a
The underlined items indicates the initial setting.
38
Description
unit is in the recording mode.
modes.
(JOG/SLOW/SHTL) mode.
mode.
cassette is inserted.