Edit - Panasonic AJSD930P Operating Instructions Manual

Setup menus
USER menu
<EDIT>
No./Item
301 SD955A This selects the operation to be performed
when an edit point has been set incorrectly
IN/OUT DEL (when the OUT point is before the IN point).
0000 MANU :
Editing is not executed unless the illegal edit
point is cleared or set again properly.
0001 AUTO :
The edit points already input are automatically
cleared.
303 This selects STD or NON-STD in accordance
with the composite input signal.
STD/
NON-STD 0000 AUTO :
Standard/non-standard
automatically identified and processed.
0001 STD :
Standard signals are processed. (Forced STD)
0002 N-STD :
Non-standard signals are processed. (Forced
NON-STD)
<Note>
Use the non-standard (N-STD) setting when
video or audio trouble occurs with signals from
laser discs or a satellite.
304 This selects the video signal processing.
SERVO REF 0000 AUTO :
Servo is synchronized with the input signal
during recording and editing, or with the REF
signal during playback.
0001 EXT :
Servo is synchronized at all times with the REF
signal.
305 This sets the channel assignments for the
controller's analog audio preset when editing
EDIT RPLCE1 the digital audio of the VTR using a controller
which does not have a digital audio edit
preset control function.
This selects the channel concerned when the
VTR CH1 edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000 N-DEF :
Not set.
0001 CH1 :
Compliance with analog CH1 edit preset.
0002 CH2 :
Compliance with analog CH2 edit preset.
0003 CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
The underlined items indicates the initial setting.
40
Description
signals are
No./Item
306 The same type of setting as setup menu No.
305. This selects the channel concerned when
EDIT RPLCE2 the CH2 edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000 N-DEF :
Not set.
0001 CH1 :
Compliance with analog CH1 edit preset.
0002 CH2 :
Compliance with analog CH2 edit preset.
0003 CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
307 The same type of setting as setup menu No.
305. This selects the channel concerned when
EDIT RPLCE3 the CH3 edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000 N-DEF :
Not set.
0001 CH1 :
Compliance with analog CH1 edit preset.
0002 CH2 :
Compliance with analog CH2 edit preset.
0003 CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
308 The same type of setting as setup menu No.
305. This selects the channel concerned when
EDIT RPLCE4 the CH4 edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000 N-DEF :
Not set.
0001 CH1 :
Compliance with analog CH1 edit preset.
0002 CH2 :
Compliance with analog CH2 edit preset.
0003 CH1+2 :
Compliance with analog CH1 or CH2 edit
preset.
Description