Table of Contents
Advertisement
Setup
Part names and
functions
A
B
C
E
M
N
Used when registering the keypad
to the hub.
Volume
Used to adjust the volume of the
sounds emitted by the keypad.
Speaker
Touchpanel
When no buttons are displayed
here, touch this area to display the
buttons.
Touchpanel buttons
LED indicator
DC jack
8
D
F
G
Touchpanel buttons
These buttons allow you to confirm and
change the system's arm mode. During
normal operation, the button that
corresponds to the current arm mode is
lit by default, and all other buttons are
dimmed. When you tap the touchpanel,
the arm mode buttons light for 10
seconds. During this time, you can tap
an arm mode button to switch to the
corresponding arm mode.
Button
None
displayed
, lit
, lit
, lit
Current arm
mode button
blinking slowly
All buttons
blinking slowly
*1
You can configure the keypad so
that its arm mode buttons do not
light during normal operation. For
more information, refer to the
User's Guide (page 16).
Status
No power, or buttons
*1
are turned off
.
Normal operation,
[Arm: At Home] mode
is selected.
Normal operation,
[Arm: Away] mode is
selected.
Normal operation,
[Disarm] mode is
selected.
Alarm system was
triggered.
Registration mode
(you pressed and held
M
N)
Advertisement
Table of Contents
