Apm - Asus 90SF00H1-M00080 Manual

Intel LAN2 Enable [Enabled]
Allows you to enable or disable the Intel LAN.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Intel LAN2 Enable to [Enabled].
Intel LAN ROM Type [Disabled]
Allows you to select the Intel LAN ROM type.
Configuration options: [Disabled] [PXE] [iSCSI]
Due to Intel
or [iSCSI] is selected.
5.5.7

APM

Allows you to configure the Advance Power Management (APM) settings.
Restore AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCIE [Disabled]
[Disabled]
[Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
5-20
®
limitations, both Intel LAN ROM Type options should be the same when [PXE]
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Disables RTC to generate a wake event.
Enables RTC to generate a wake event.
Chapter 5: BIOS Setup