Apm - Asus 90SF0071-M00040 User Manual

5.4.7

APM

Allows you to configure the Advance Power Management (APM) settings.
Restore AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCIE [Disabled]
[Disabled]
[Enabled]
Power On By Ring [Disabled]
[Disabled]
[Enabled]
This item functions only if there is a serial port (COM1) connector on the motherboard.
Power On By RTC [Disabled]
[Disabled]
[Enabled]
5-16
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Disables the Ring devices to generate a wake event.
Enables the Ring devices to generate a wake event.
Disables RTC to generate a wake event.
W hen set to [Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Second will become user-configurable with set values.
Chapter 5: BIOS Setup