Table of Contents
Advertisement
6.
DDR4 thermal event setting (3-pin DIMMTRIP1, DIMMTRIP2)
This jumper allows you to enable/disable DDR4 DIMM thermal sensing event pin.
7.
PMBus 1.2 PSU select jumper (3-pin SMART_PSU1)
This jumper allows you to enable or disable the Smart Ride Through (SmaRT) function.
This feature is enabled by default. Set to pins 2-3 to disable it. When enabled, SmaRT
allows uninterrupted operation of the system during an AC loss event.
ASUS ESC4000 G4 Series
4-7
Advertisement
Table of Contents
