ESC4000 G4S
For the ESC4000 G4S, the NVME drives may be installed in HDD bay 7 and 8 as shown in
the illustration below:
1.
Press the spring lock.
2.
Pull the tray lever outwards to remove
the drive tray.
3.
Place the storage device tray on a flat
and stable surface.
4.
Release the screws on each side of the
storage device tray to release the metal
beam.
The metal beam supports the
storage device tray horizontally
to prevent the storage device tray
from bending or deforming.
ASUS ESC4000 G4 Series
HDD bay 7 and 8
Metal beam
2
1
2-17