1.1.2 AFP7CCET1 Port Specifications
100BASE-TX / 10BASE-T connector (RJ45)
When an Ethernet (100BASE-TX, 10BASE-T) is being used, this connector is used to connect
the communication cassette and the hub, using a UTP cable.
Functions of LED lamps
(1) LINK
Turns ON when the connection is connected between the communication cassette AFP7
CCET1 and external equipment.
(2) ACK
Flashes when some communication is in progress with a connected device (e.g.
sending/receiving a command or response).
1.1.3 Types of communication cassette
Model no.
AFP7CCET1
(Note) See 1.2 for the information of "User connection" or "System connection".
1.1.4 Configurator WD
The communication tool software "Configurator WD" is required to set Ethernet
communication for the AFP7CCET1
The Configurator WD can be downloaded from our website free of charge.
http://industrial.panasonic.com/ac/e/dl_center/software/
of charge)
Pin no.
Signal name
TX+
1
TX-
2
RX+
3
Not used
4
Not used
5
RX-
6
Not used
7
Not used
8
Communication interface
User connection
System connection
1.1 Communication Ports of CPU Unit
Communication ports
that can be allocated
COM.1
(Member registration is required. Free
COM.2
●
●
1-3