Turning The Unit On And Off - Panasonic FZ-E1 Series Operating Instructions Manual

Note
• When connecting a USB cable, note the shape of the micro
USB plug and the micro USB port. Do not attempt to connect
the USB cable upside down.
• Remove any dust or water droplets from plugs before
connecting them. Do not use excessive force when inserting
plugs or insert them at an angle.
• If the installed battery fails the unit's battery authentication test,
the battery cannot be charged.
• The battery cannot be charged while the unit is turned off. If the
unit is off and you begin charging, the unit will start.
Confirming the battery level
The battery level is displayed in the upper-right corner of the screen,
in the status bar.
Fully
charged
You can also confirm the specific amount of battery level remaining.
Flick the Start screen to the left, and then in the App list, tap
[Settings] → [battery saver].

Turning the unit on and off

Turning the unit on and off
Turning the unit on
Press and hold
briefly vibrates.
Note
• We recommend that you fully charge the battery before turning
on the unit for the first time or after an extended period of
storage.
• If the unit's temperature is -12 °C (10.4 °F) or less when you try
to turn the unit on, the indicator flashes in green and orange
and the unit will not turn on. When the unit warms up, the
indicator will stop flashing and the unit will turn on
automatically.
(power button) on the top of the unit until the unit
Charging
Getting Started
Very low
41