JVC VS-DT2000 Service Manual page 17

<Speaker section>
Removing the amplifier assembly
1. From the rear side of the speaker main body,
remove the eleven screws A attaching the amplifier
assembly.
2. Remove the connectors from the speaker.
Removing the back panel (See Fig. 3.)
Remove the amplifier assembly.
1. Pull out the knob and remove it.
2. Remove the three screws B attaching the back
panel.
(See Figs. 1 and 2.)
A
A
A
Fig.1
Connectors
Amplifier assembly
Fig.2
Fig.3
VS-DT2000
A
Amplifier assembly
Knob
B
Back panel
1-17