Frigidaire FNFG60JGR User Manual page 36

INSTALLATION
1. Install the anti-tilt protection 232 - 237
mm down from the top surface of the
appliance and 110 - 115 mm from the
side of the appliance into the circular
hole on a bracket. Screw it into the solid
material or use applicable reinforcement
(wall).
2. You can find the hole on the left side at
the back of the appliance. Lift the front
of the appliance and put it in the middle
of the space between the cupboards. If
the space between the bench
cupboards is larger than the width of the
36
110-115
mm
232- 237
mm
appliance, you must adjust the side
measurement to centre the appliance.
If you changed the dimensions of the
cooker, you must align the non-tip
device correctly.
CAUTION!
If the space between the bench
cupboards is larger than the width of
the appliance, you must adjust the
side measurement to the centre of the
appliance.
Electrical installation
WARNING!
The manufacturer is not responsible if
you do not follow the safety
precautions from Safety chapters.
This appliance is supplied with a main plug
and a main cable.