Siemens Gigaset SX761 dsl Manual page 14

Hide thumbs Also See for Gigaset SX761 dsl:
Table of Contents

Advertisement

First steps
The LEDs (from left to right) have the following functions:
LED
State
On (green)
Power
Off
On
Flashing
ADSL
Off
On
Online
Off
On
LAN1 –
Flashing
LAN4
Off
On
VoIP
Flashing
Off
On
Phone 1/
Flashing
Phone 2
Off
14
Status
The Gigaset SX761 dsl is connected to the mains.
The Gigaset SX761 dsl is disconnected from the mains.
A DSL connection is established.
The DSL line is being synchronised. The synchronisation
phases are shown as slow flashing (registering) and fast
flashing (training).
If no DSL cable is connected, the LED will flash at uniform
intervals.
DSL is deactivated.
Connection to the Internet has been established.
There is no Internet connection.
A device is connected to the relevant LAN port.
The relevant LAN port is sending or receiving data (traffic).
There is no device connected.
At least one port is configured for VoIP and VoIP access is
registered with the provider.
A call is currently being made via the Internet.
There is currently no connection for Internet telephony or no
VoIP port has been configured.
The receiver of the phone connected to the port has been
lifted.
The phone is ringing and a call is being received or a call is
being conducted.
No phone is connected or the connection is idle.

Advertisement

Table of Contents
loading

Table of Contents