Siemens Gigaset SX761 dsl Manual page 85

If you choose Never, you can start the firmware update with by clicking check for
updates.
ì
Click OK to apply the settings.
Automatic firmware update
If you have configured the option Check periodically and a new firmware version of
your Gigaset SX761 dsl is detected while you are surfing the Internet an information
page is opened. On this page you can choose whether the update should be started.
ì
Click Perform update now! to start the update.
ì
Enter the system password (see page 78) on the next page.
ì
Click OK. The firmware will now be updated.
User requested check
ì
Click check for updates in order to check whether new updates are available on the
selected update server.
If a new firmware is available, an information page is opened. On this page you can
choose whether the update should be started.
ì
Click on Perform update now! to start the update.
ì
Click OK. The firmware will now be updated.
Warning:
Do not turn off the Gigaset SX761 dsl during the updating procedure and do not inter-
rupt the power supply. Turning off the device can make it unusable. The update can
take several minutes.
Gigaset Communications GmbH accepts no liability for damage that occurs through
improper use.
Administration
85