To Charge The Battery Pack - Toshiba B-EP800-CHG-QM-R Owner's Manual

Hide thumbs Also See for B-EP800-CHG-QM-R:
Table of Contents

Advertisement

To Charge the Battery Pack

1. The B-EP800-CHG-QM-R battery charger is designed for charging the B-EP802-
BT-QM-R/ B-EP804-BT-QM-R lithium-ion battery packs. DO NOT charge any
other battery packs, or explosion, combustion, or overheating may result.
2. If the battery charger gives out smoke, a bad smell, or extraordinary heat,
immediately unplug the power cord from the AC outlet. Failure to do this may
cause fire or electric shock.
1. Le chargeur de batterie B-EP800-CHG-QM-R est prévu pour recharger les packs
batterie lithium-ion B-EP802-BT-QM-R et B-EP804-BT-QM-R. NE CHARGEZ PAS
d'autres types de packs batterie, cela risquerait d'entrainer une explosion,
une combustion ou une surchauffe.
2. SI le chargeur de batterie émet de la fumée, des odeurs suspectes, ou chauffe de
façon excessive,débranchez-le immédiatement, faute de quoi vous risquez un
incendie ou un choc électrique.
Please use the following procedure to charge a battery pack (B-EP802-BT-QM-R/B-
EP804-BT-QM-R).
1. Fit the partition into the slot. The orientation of the partition differs depending on
the battery pack size (B-EP802-BT-QM-R or B-EP804-BT-QM-R) to be charged.
When charging B-EP802-BT-
QM-R battery pack
NOTE:
 Fit the partition in the correct position and orientation and make sure the tabs
are fit into the holes.
 Be careful not to lose the partition.
 Care must be taken not to mistake the orientation, as the partition cannot be
removed once it is fitted.
WARNING!
AVERTISSEMENT!
Tab
10
When charging B-EP804-BT-QM-R
battery pack

Advertisement

Table of Contents
loading

Table of Contents