Functions Added In Multi Program 2 Mode; Differences Between Multi Program 2 Mode And Standard Mode - Sony XKS-C9111 User Manual

Functions Added in Multi Program 2
Mode
• You can set the video process for the utility 3 bus signal.
• "Sub Cut" and "Sub Auto Trans" on each switcher bank
are added to the selectable actions in the SIU (DCU
function) GPI input settings.
• "Main&Sub" and "Sub" are added to the macro event
configuration parameters and macro attachment settings.
• "Sub Program," "Sub Preset," and "Sub Trans PGM" on
each switcher bank are added to the link source bus for
cross-point button link settings.
• Snapshot attributes can be set independently for main
and sub.
• Menus for the sub bank are added to menus that can be
recalled by pressing a button twice.
• [MP2 Auto Correct] settings are available in the Effect
menu or Snapshot menu. For example, enabling this
determines whether the copy destination and copy

Differences Between Multi Program 2 Mode and Standard Mode

The differences from operation in standard mode are as
follows.
Item
a)
Keys
Wipes Patterns
(background)
Modifiers
Wipes Patterns
(keys)
Modifiers
DME wipes Use
Patterns for 1 channel
Patterns for 2 channels
Patterns for 3 channels
Backgrounds
Modifiers
Transitions Key priority
Transition preview
Preset color mix
source data is the main bank or sub bank, and
automatically switches the data.
• When extended re-entry (see page 443) is enabled on a
switcher bank, re-entry between main and sub, main and
main, and sub and sub on the same switcher bank is
supported.
• The [SUB TRANS] button on the key control block is
enabled. This functions as the [TRANS] button for the
sub bank.
• You can display whether key 1 to key 8 are assigned to
the main bank or the sub bank in the display of the
transition control block.
• On the cross-point pad of the cross-point control block,
cross-point hold of the utility 3 bus can be set.
Also, main and sub information is displayed on the
switcher bank display buttons.
• The [MAIN] button and [SUB] button are enabled on the
transition control block and transition control block
(simple type).
Main
Key 1 to key 8 can be used
Same as standard mode
Same as standard mode
• Only standard wipe patterns can be used
• Pattern mix cannot be used
• Split, pairing, modulation, spring, and spiral cannot be used
• Edge fill mattes are single color only
• Four types of multi replication are available for selection.
Supported
Main and sub can be used separately.
Only one of main and sub can be used.
For each M/E, the number of DMEs that can be used is the same as in
standard mode.
Wipe edge fill matte (including
color mix and other settings in the
Matte Adjust menu)
Same as standard mode
Not supported
Not supported
Color matte or video signal
selected on the utility 2 bus
206
Sub
Key 2 to key 8 only can be used
• Only standard wipe patterns can be
used
• Pattern mix cannot be used
• Split, pairing, modulation, spring, and
spiral cannot be used
• Edge fill mattes are single color only
• Four types of multi replication are
available for selection.
Cannot be used (Can be used, with a
setting change)
Wipe edge fill matte (single color only)
Wipe border colors are single color only
Color matte only