Numeric Keypad Window
a Item display
This displays the name of the parameter being set using the
numeric keypad window.
b Max./min. value indication
This displays the maximum and minimum values of the
parameter.
Keyboard Window
Note
Except when changing source names, the following
characters cannot be used.
space, \, /, :, ;, , (comma), . (period), <, >, *, ?, ", |
1Item display
2 Max./min. value
indication
3Input display
4Close button
5TC button
6– button
7Clear button
8Trim button
9Enter button
56
c Input display
This displays the value being entered in the numeric
keypad window.
d Close button
This button closes the numeric keypad window.
e TC (timecode) button
When the numeric keypad window is opened to enter a
timecode value, this button appears in the pressed state.
The range of timecode values you can enter varies as
follows depending on the signal format.
00:00:00:00 to 23:59:59:xx
where xx = (number of frames per second) – 1
f – (minus) button
This button toggles the sign of the entered value.
g Clear button
This button clears the input display. It does not change the
parameter setting.
h Trim button
After entering the difference from the current value, press
this button to confirm the numeric input.
i Enter button
This button confirms the entered value.
If the value is set correctly, the numeric keypad window
closes.
If it is not set correctly, the input display changes color.