Switch Cover - HP Compaq Presario,Presario V3501 Maintenance And Service Manual

Switch cover

Description
Switch cover (includes power button board and cable, LED board, and LED board cable
For use in computer models with Intel processors or full-featured models with AMD processors
For use in defeatured computer models with AMD processors
Before removing the switch cover, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the keyboard (see
5.
Remove the switch cover:
Remove the two Phillips PM2.5×9.0 screws (1) and the three black Phillips PM2.0×5.0 screws (2)
1.
that secure the switch cover to the computer.
Turn the computer display-side up, with the front toward you.
2.
Open the computer as far as possible.
3.
Disconnect the power button board cable (1) from the system board.
4.
62 Chapter 4 Removal and replacement procedures
Battery on page 46).
Keyboard on page 59).
Spare part number
451313-001
417078-001