Disconnect the following cables:
5.
(1) Display panel cable
(2) Display switch module cable
(3) Microphone cable
Remove the wireless antenna cables (4) from the hole in the system board and the routing
6.
channels (5) built into the top cover.
CAUTION:
Support the display assembly when removing the following screws. Failure to support
the display assembly can result in damage to the display assembly and other computer components.
Remove the five black Phillips PM2.5×7.0 screws (1) that secure the display assembly to the
7.
computer.
Remove the display assembly (2).
8.
Component replacement procedures
65