Display Assembly - HP Compaq Presario,Presario V3501 Maintenance And Service Manual

Display assembly

Description
14.1-inch, WXGA, BrightView display assembly for use in computer models with Intel or AMD
processors (includes microphones)
14.1-inch, WXGA, BrightView display assembly for use only in defeatured computer models with AMD
processors
Before removing the display assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Disconnect the wireless antenna cables from the WLAN module (see
5.
Remove the following components:
6.
Keyboard (see
a.
Switch cover (see
b.
Remove the display assembly:
Close the computer and turn it upside down, with the front toward you.
1.
Remove the Phillips PM2.5×9.0 screw that secures the display assembly to the computer.
2.
Turn the computer display-side up, with the front toward you.
3.
Open the display as far as possible.
4.
64 Chapter 4 Removal and replacement procedures
Battery on page 46).
Keyboard on page 59)
Switch cover on page 62)
Spare part number
448611-001
451163-001
WLAN module on page 50).