HP Compaq Presario,Presario V6500 Maintenance And Service Manual page 57

Description
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China,
Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia,
Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and
Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent &
Grenada, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand,
Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the
United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
For use in Japan
●
802.11b/g WLAN module for use in Thailand
Broadcom 4311AG 802.11a/b/g modules:
For use in the United States and Canada
●
● For use in France, Germany, Italy, the Netherlands, Spain, the United Kingdom, Nordic region,
and India
Broadcom 4321AGN 802.11a/b/g/n modules:
For use in the United States and Canada
●
For use in France, Germany, Italy, the Netherlands, Spain, the United Kingdom, Nordic region,
●
and India
Before removing the WLAN module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the memory/WLAN module compartment cover (see
5.
Remove the WLAN module:
Disconnect the two WLAN antenna cables (1) from the WLAN module.
1.
NOTE: The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The
gray WLAN antenna cable is connected to the WLAN module "Aux" terminal.
NOTE: Computer models equipped with an 802.11a/b/g/n WLAN module have an additional
wireless antenna cable (2), yellow in color.
Remove the two Phillips PM2.0×3.0 screws (3) that secure the WLAN module to the computer. (The
2.
edge of the module opposite the slot rises away from the computer.)
Battery on page 42).
Spare part number
441090-291
451861-004
441075-001
441075-002
434661-001
434661-002
Memory module on page
Component replacement procedures
45).
49