Switch Cover - HP Compaq Presario,Presario V6500 Maintenance And Service Manual

Switch cover

Description
Switch cover for use in full-featured computer models (includes LED board and cable)
Switch cover for use in defeatured computer models (includes LED board and cable)
Before removing the switch cover, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the switch cover:
Remove the two Phillips PM2.5×10.0 screws (1) and the Phillips PM2.5×4.0 screw (2) that secure
1.
the switch cover to the computer.
Turn the computer display-side up, with the front toward you.
2.
Open the computer as far as possible.
3.
Battery on page 42).
Spare part number
431425-001 and
451010-001
455260-001
Component replacement procedures 53