Installing And Setting Up Omnibook Diagtools; Downloading The Latest Version From The Web - HP OmniBook 2100 User Manual

Starting OmniBook DiagTools
Installing and Setting Up OmniBook
DiagTools
There are two ways to run DiagTools – from a floppy diskette or from the hard disk
drive (the F10 method). All OmniBook PCs have the capability to run DiagTools
from a floppy diskette, and some of these OmniBook PCs have the option to run
DiagTools from the hard disk drive.
The PC boots (or starts) from the floppy diskette. However, first you must create
a DiagTools floppy diskette from the World Wide Web or locally from your hard
disk or Recovery CD.
If your computer supports this method, you press F10 during start up. Also, you
need a special utility to view and retrieve the support ticket.
OmniBook DiagTools must not be run directly from your operating system.
OmniBook DiagTools will function correctly only under the DOS operating system
and once the correct drivers have been loaded.

Downloading the Latest Version from the Web

You can download the latest version of the OmniBook DiagTools utility from the
OmniBook web site in the Support, Software area:
http://www.hp.com/omnibook
For more information about the HP OmniBook website and for information about
HP Electronic Information Services, refer to page 6-3.
1-2