Auto Channel Memory - LG DP-1400T Manual

Auto Channel Memory

Automatically finds all channels available and stores all the active channels
found.
1 Connect an antenna:
Display the menu to select the TV
2
operation mode:
3 Select [TV]:
4 Display [TV SETUP] menu:
Select [CH. SYSTEM] on the [TV SETUP]:
- Select a channel system used in your
5
area. (PAL B/G,PAL/I, PAL D/K or
SECAM B/G, SECAM D/K)
Select [AUTO SCAN] on the [TV SETUP]:
6 - Select [START] and then press ENTER to
start auto tuning.
Watching the TV program - more you can do
Channel selection
You can select channels as described below.
Use v /V on the remote control to select a channel through the chan-
•
nels in memory.
• Use number (0-9) buttons to select a channel directly.
O
• Press RETURN ( ) to return to the previous channel you viewed.
Manual Channel Edit
You can edit a channel using [CHANNELS] option in the [TV SETUP]
menu.
1. Select [TV] mode.
2. Press SETUP to display [TV SETUP] menu.
15
DP372D-P_AIRNDLK_ENG_MFL5673286215 15 DP372D-P_AIRNDLK_ENG_MFL5673286215 15
3. Select [CHANNELS] option then press B.
4. Use v /V to select a menu and use b/B to select a value of the item to
be set.
• [CH. No]: Selects a channel number.
• [Fine]: Selects a frequency to optain a clear picture.
BUTTON
• [Band]: Selects a channel band. (VHF H, VHF L or UHF)
• [Skip]: Sets the channel to the skipped channel. The channel cannot be
-
selected using the v /V button during TV viewing.
MODE
• [Manual]: Searches for a channel automatically.
Searching stops when the unit tunes in a channel.
b B, ENTER
SETUP
Notes on the TV receiving signal
If the TV receiving signal is not poor, it may appear following symptoms.
B , v V /ENTER
• Screen: - Shaking
- Faded in double or triple
- Field gets bad gradually.
B /ENTER
- Color appears or disappears.
- Screen is spotted.
- Stripes appear.
• Sound: - It noises.
It may not receive TV receiving signals as following.
- Between Buildings
- At an airplane or a train passing nearby
- A power cable nearby
- In the mountain or forest
- A automobile, A motorcycle
- A high tension wire
• This set should be - reset in case of moving to another area due to different
local signal.
• Depend on the location, the signal recetion is different.
10/23/08 2:44:29 PM 10/23/08 2:44:29 PM