Page 21
Contents 1 Important 10 Notices Electromagnetic fields (EMF) 2 Your air purifier Recycling Product overview Controls overview 3 Getting started Installing the filter 4 Using the air purifier Understanding the air quality light Turning on and off Changing the fan speed Light sensor Night sensing mode Set the child lock...
If the power cord is • Make sure that foreign damaged, you must have • objects do not fall into the it replaced by Philips, a...
Page 23
If the power socket used • Only use the original • to power the appliance Philips filters specially has poor connections, intended for this the plug of the appliance appliance. Do not use any becomes hot. Make other filters.
Page 24
or malfunctioning of the use under normal appliance. operating conditions. Do not use this appliance Do not use the appliance • • when you have used in wet surroundings or in indoor smoke-type insect surroundings with high repellents or in places ambient temperatures, with oily residues, burning such as the bathroom,...
Control panel Congratulations on your purchase, and welcome to Philips! Air quality light Air outlet To fully benefit from the support that Philips offers, register your product at Air quality sensor www.philips.com/welcome. NanoProtect filter Pro S2 Newly-launched Philips Air Purifier (FY1417)
3 Getting started Remove the filter. Installing the filter Note • Make sure the air purifier is unplugged from the electrical outlet before installing the filter. Remove all packaging materials • Make sure the side of the filter with the from the filter.
4 Using the air Attach the pre-filter back into the air purifier. purifier Understanding the air quality light Air quality light Air quality level color Blue Good Note Blue-Purple Fair • Make sure the side with the clip is Purple-Red Poor pointing towards you, and that all hooks of the pre-filter are properly...
Touch to switch on the air purifier. Changing the fan speed There are several fan speeds available. You can choose the auto mode, speed 1, 2, 3 or turbo mode (t). Auto(A) • Touch the fan speed button repeatedly to select the auto mode. »...
After the ambient light becomes bright Manual and lasts at least for 10 seconds, all • Touch the fan speed button lights will turn on again. repeatedly to select the fan speed If the ambient light becomes bright and you need. lasts for at least 10 seconds, all light will be on.
Touch and hold the child lock Auto activating the night button for 3 seconds again to sensing mode deactivate child lock. When the air purifier operates in auto » The child lock icon mode or allergen mode, if the light disapears from the screen.
5 Cleaning Note • If the air purifier is used in a dusty environment, it may need to be cleaned more often. Note • If the humidity level in the room is • Always turn the air purifier off and very high, condensation may develop unplug the air purifier from the on the air quality sensor and the air...
Clean the air quality sensor, the dust inlet and the dust outlet with a damp cotton swab. Press the two clips down (1) and pull the pre-filter towards you (2). Dry all parts thoroughly with a dry cotton swab. Reattach the air quality sensor cover.
Page 34
Put the plug of the air purifier in the Note wall outlet. • To optimize the lifetime of the pre- Touch and hold the filter, make sure it dries completely 3 seconds to reset the pre-filter after cleaning. cleaning time. •...
6 Replacing the filter Filter replacement indicator This air purifier is equipped with a Note filter replacement indicator to make • Do not touch the pleated filter surface, sure that the air purification filter is in or smell the filter as it has collected optimal condition when the air purifier pollutants from the air.
7 Storage Put the plug of the air purifier in the wall outlet. Touch and hold the for 3 seconds to reset the filter lifetime counter. Turn off the air purifier and unplug from the wall outlet. Clean the air purifier, air quality sensor and pre-filter (see chapter ‘Cleaning’).
This chapter summarizes the most common problems you could encounter with the air purifier. If you are unable to solve the problem with the information below, visit www. philips.com/support or contact the Consumer Care Center in your country. Problem Possible solution The air purifier •...
Page 38
Problem Possible solution The color of the air • The air quality sensor is dirty. Clean the air quality sensor quality light always (see chapter "Cleaning"). stays the same. • The first few times you use the air purifier, it may produce a plastic smell.
(you find its phone number regarding exposure to electromagnetic in the worldwide guarantee leaflet). If fields. there is no Consumer Care Centre in your country, go to your local Philips dealer. Compliance with EMF Koninklijke Philips N.V. manufactures Order parts or...
Recycling Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. Follow your country's rules for the separate collection of electrical and electronic products.