How To Wear; Factory Reset The Headset - Philips TAT3255 User Manual

Battery LED indicator
on Charging case with
USB Type-C cable
While charging headset, Blue LED
status as below:
4 blue LED stay on for 70-100% power
2 blue LED stay on and 3rd LED ashes
every second for 50-75% power
1 blue LED stays on and 2nd LED ash-
es every second for 25-50% power
1 blue LED ashes every second for
0-25% power

How to wear

5 Factory reset
the headset
If you encounter any pairing or connection
issue, you can follow the following
procedure to factory reset
your headset.
On your Bluetooth device, go to the
Bluetooth menu and remove Philips
TAT3215 from the device list.
Bluetooth device.
Put both headset back to charging
case. Hold and press left & right
headsets function button for 5
seconds.
Take both headsets from the charging
case, the headset will power on
automatically.
There will be a voice "Power on" and a
voice " Pairing".
Then, there will be a voice" Right
channel" on right headset and
"Left Channel" on left headset after
paring each other. The LED on Right
headset
for 3 mins.
There will be a voice "Connected"
from Right Channel.
Then, the right headset LED
earpiece ashes in white and blue
for 3 mins.
To pair the headset with a Bluetooth-
device, turn on the Bluetooth function
of your Bluetooth device, select
Philips TAT3215, TAT3255.
ashes in white and blue
EN