Mitsubishi Electric PMCR-50VHA-200D KIT Installation Manual page 28

7. Remote controller operation
Should settings be changed from default please enter new setting in 'Field Setting' column. This will ease resetting in the future should the system use change or the circuit
board need to be replaced.
Commissioning/Field settings record sheet
Remote controller screen
Main
DHW max. temp.
Heating mode
Cooling mode
Holiday mode
Menu Water temp. setting
Compensation curve Low outdoor ambient
Initial settings
Service
en
EN-28
DHW
Heating
Cooling
Holiday
Outdoor ambient temp. −15 - 34°C
temp. point
Target flow temp.
Outdoor ambient temp. −14 - 35°C
Hi outdoor ambient
temp. point
Target flow temp.
Language
°C/°F
Temp. display
Time display
Restriction Operation lock
Mode skip
Temp. range
Temp. offset setting DHW/Heating
Cooling
Temp./Analog signal DHW/Heating
Cooling
Parameters
20 - 60°C
20 - 60°C
5 - 25°C
Active/Non active/Set time
20 - 60°C
20 - 60°C
5 - 25°C
20 - 45°C
20 - 60°C
20 - 60°C
ENG/GER/SP/IT/FR/SW/JP
1°C/1°F
ON/OFF
hh:mm/hh:mm AMPM/AMPM hh:mm
none/Mode&Temp/All
DHW Used/Not used (Skipped) Used
Heating Used/Not used (Skipped) Used
Heating Eco Used/Not used (Skipped) Used
Cooling Used/Not used (Skipped) Used
Holiday Used/Not used (Skipped) Used
DHW 20 - 60°C
Heating 20 - 60°C
Cooling 5 - 25°C
−15 - 15°C
−15 - 15°C
Target temp. of low signal point
−20 - 90°C
Target temp. of hi signal point
−20 - 90°C
Target temp. of low signal point
−20 - 90°C
Target temp. of hi signal point
−20 - 90°C
Default
Field setting
setting
50℃
45℃
15℃
—
50℃
45℃
15℃
35℃
−15℃
50℃
35℃
25℃
ENG
1°C
OFF
hh:mm
none
20 - 60°C
20 - 60°C
5 - 25°C
0℃
0℃
20℃
60℃
5℃
25℃
Notes