Table of Contents
Advertisement
PHILIPS 4000 and 3000
The machine is programming
the amount of milk to be
dispensed for a cappuccino.
The machine is programming
the amount of coffee to be
brewed for a cappuccino.
The machine is programming
the amount of milk to be
dispensed for frothed milk.
Insert the water dispensing spout and press the "
Press "
Warning Signals (Yellow Colour)
The machine is warming up.
The machine is performing the
rinse cycle. Wait until the machine
has completed the cycle.
The machine needs the
"INTENZA+" water fi lter to be
replaced.
You need to descale the machine. Press the "
process. Follow the steps described in the "Descaling" chapter of this manual.
If you want to descale the machine later, press the " " button to continue using
the machine. Please note that not descaling your machine will ultimately make it
stop working properly. In this case, repair is NOT covered under your warranty.
Warning Signals (Red Colour)
Completely insert the drip tray
with the coffee grounds drawer
into the machine and close the
service door.
Fill the coffee bean hopper.
" to exit.
03 BRIEF INSTRUCTIONS
The machine reminds you to
insert the carafe and remove
the dispensing spout.
" button to start dispensing.
The brew group is being reset
due to machine reset.
Fill the coffee bean hopper with
coffee beans and restart the
cycle.
The machine is priming the
circuit.
" button to start the descaling
The brew group must be
inserted into the machine.
Empty the coff ee grounds
drawer. Wait 5 seconds before
reinserting it.
Fill the water tank.
2/13
Advertisement
Table of Contents
