Philips 4000 Service Manual page 50

PHILIPS 4000 and 3000
When the Steam-Out is complete the following parameters are reset to their default values:
Length "Espresso" product
Length "Espresso Lungo" product
Length "Large Coffee" product
Length "Cappuccino" (Coffee + Milk product)
Length "Milk" product
Stand-By Time
Coffee Ground
The request for Priming the Circuit at the first switch on is set.
Brewing Unit Empty
Aroma Strength Espresso
Aroma Strength Large Coffee
BU current array (BU during rinsing)
Grinder Sensing Array
Grinding time Aroma Very Light (1 Bean)
Grinding time Aroma Light/Medium (2/3 Beans)
Grinding time Aroma Strong/Extra Strong (4/5 Be-
ans)
Filter Presence
Filter Pulses
Last Error Log
Coffee Duct Empty = TRUE (To grind more first time after steam-out and refill duct with coffee)
(Default 128 impulses)
(Default 292 impulses)
(Default 428 impulses)
(Default 170 impulses coffee & 34sec milk)
(Default 34 seconds)
(Default 15 minutes)
(Default 0)
(Default 3 beans)
(Default 4 beans)
(Default 150mA)
Default 2000ms)
(Default 3000ms)
(Default 3500ms)
(Default 4000ms)
(Default OFF)
(Default 0)
(Default 0)
05 SERVICE MODE
9/18