Manual Settings; Using Programs - Silvercrest SHF 1400 A1 Operating Instructions Manual

9.4

Manual settings

While the device is switched on, the dis-
play 3 shows the lower bar with the but-
tons 18 – 23. You can use these to change
the settings for temperature and cooking
time whenever you like, e.g. even if a pro-
gram is already running.
• Use the temperature button
the setting buttons
the temperature between 80 °C and
200 °C:
- Press the temperature button
- Quickly press the setting buttons
19/ 21 for 5 °C steps. Keep
pressed for fast forward/reverse.
• Use the cooking time button
the setting buttons
the cooking time between 1 and
60 minutes:
- Press the cooking time button
- Quickly press the setting buttons
19/ 21 for 1-minute steps.
Keep pressed for fast forward/re-
verse.
18 and
19/ 21to set
18.
22 and
19/ 21 to set
22.
9.5

Using Programs

NOTE: make sure that the food will not
touch the hot heating element 2 at the top of
the interior and become stuck there.
The device has preset programs for many
foods and types of preparation. When you
select a program, you can also carry out the
following settings at any time:
- Temperature
- Cooking time
1. Prepare the foods and place them in the
frying basket 5.
2. Place the frying basket 5 in the pan 10.
3. Slide the pan 10 into the housing 1.
4. Select the desired program (see "The
programs at a glance" on page 64).
5. Switch on the device with the Start/Stop
button 20.
6. Press the Menu button
ly to select the desired program. The
corresponding symbol flashes.
7. If necessary, make manual adjustments
to the temperature and cooking time.
8. Start the cooking process with the Start/
Stop button 20.
- The program symbol flashes. The oth-
er program symbols are hidden.
- The fan symbol
- The heating symbol
- The 18,
21 buttons are lit to enable you
to change the preset values for cook-
ing temperature and cooking time.
23 repeated-
25 flashes.
24 is lit.
22, 19, and
67
GB